Home > Hard Drive > Hard Drive Shows Up In Bios But Not Disk Management

Hard Drive Shows Up In Bios But Not Disk Management


There is also a jumper for Cable Select which recognizes the drives based on their location on the cable. Reply Nunyabiz on November 14, 2008 at 9:30 am If this guide was honestly too much for you or anyone with more than a room temp IQ to understand then you You will be prompted during the first part of setup to partition and format your drive; if you are using Windows 2000, XP or Vista, make sure to use the NTFS It's there in the device manager too, saying it is working properly but it has no letter allocated to it. weblink

You can save the data just not the OS So when you activate a license on a PC, change the HD to another PC it is no longer activated Jul You'll need to make sure the copy of windows you buy a key for is the exact same version of windows as you have on your current hard drive. Don't know if it's important, but i'm running XP. Reply Paul on February 22, 2008 at 11:50 pm i have a SATA hard drive and their is a driver issue and ITS PISSIN ME OFF (sorry had to say that)

Hard Drive Shows Up In Bios But Not Disk Management

Now that SATA is becoming much more prevalent than IDE, it is becoming a lot less likely that you will need to worry about jumpers during this process.Before installation, inspect the From here, you can partition and format the drive. http://msdn.microsoft.com/en-us/lib...=vs.85).aspx#physical_memory_limits_windows_7 Aug 1, 2013 at 9:13 AM #21 dr emulator (madmax) Joined: May 5, 2009 Messages: 2,252 (0.78/day) Thanks Received: 177 Location: the uk that's all you need to know Can u please guide me/help me to install the new system.

All rights reserved Use of this Site constitutes acceptance of our User Agreement (effective 3/21/12) and Privacy Policy (effective 3/21/12), and Ars Technica Addendum (effective 5/17/2012) Your California Privacy Rights The Old Harddrive, New Computer, Won't boot Discussion in 'Storage' started by Ravenas, Nov 8, 2010. If you installed a drive on a connector that was not in use, you may have to set the corresponding drive to "Auto." If your BIOS has an auto-detect feature, you Installed New Hard Drive And It Wont Boot other then that its not able to without this the drive will not read and be able to transfer files Reply Gary Hart on August 7, 2007 at 4:46 am Thanks

Reply Janna on August 27, 2007 at 3:26 pm I have a problem! What are the pro's and con's of cloning the old drive versus a Windows reinstall? You could re-read my post or have someone read it to you.It's not that hard. No, create an account now.

Here is a copy of the boot.ini file from my computer:[boot loader]timeout=30default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS[operating systems]multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetectI am assuming that I need to change the boot loader information, but I am Windows 10 Not Detecting Second Hard Drive It does the same with all three settings. I suggest that if readers are willing to search for this topic, then they should also to be able to take a few risks. The primary drive on a channel is called the Master, and the secondary one is called the Slave.

Computer Won't Boot With Second Hard Drive

Welcome to the Ars OpenForum. http://www.techpowerup.com/forums/threads/old-harddrive-new-computer-wont-boot.134147/ Reply Bruce on September 9, 2008 at 11:02 pm I have a gateway computer and I added an extra hard drive to the computer and its not showing up on my Hard Drive Shows Up In Bios But Not Disk Management Because of just that, they are NEWBIES. Computer Won't Power On With Hard Drive Plugged In The Drive is found under the device manager under mass storage but not in disk manager.

If I'm replacing my hard drive I understand that in order to clone the hard drive I need to have the new hard drive act as the slave drive which I http://controlpanelsource.com/hard-drive/hard-drive-not-detected.html Please help. Thanks for getting me back on the right track. Members can monitor the statuses of their requests from their account pages. Second Hard Drive Not Showing Up In Disk Management

If you changed any of those settings, don't forget to click the "Apply" button before exiting.I suspect that the boot.ini file is pointing to the CD drive instead of the proper reboot from "broken HDD". i have a question tho,, i want to add a second drive simply for photo work. http://controlpanelsource.com/hard-drive/sata-hard-drive-not-detected-in-bios-or-setup.html I did not mention anywhere that he should set it to the a particular numbered pin! –aliasgar Sep 11 '12 at 14:03 Thanks for this.

I forgot about formatting it. Install/diagnostic/repair Software From Seagate Reply Jakey on October 2, 2007 at 11:08 am I have no experience whatsoever and didnt even know the difference bewteen the cables but you have saved me 50.00 possibly more The worst part about installing hard drives is setting the jumpers on the drive so that it works correctly with your current hardware.

There are no jumpers to worry about on SATA drives.

I do not, however, have a long enough power cable for the new HD. The ribbon cable goes from the controller to the drive. Thanks for reading hope this helps Patrick Patricks A+ PC Repairs share|improve this answer answered Feb 7 '13 at 0:04 Patrick 1 add a comment| up vote 0 down vote If Windows 7 Won't Boot With Second Hard Drive Reply Dave on November 24, 2008 at 1:34 pm Hi I bought this on Ebay, it works realy well, you can connect any hard drive to a usb socket.

Thanks for your time Reply Mitch on August 17, 2007 at 3:58 am Thanks alot, THE BEST step by step tutorial that I have found. D+ Reply Stefen Kaur on November 11, 2008 at 12:50 pm I have a question. I've done this before with Vista but can't get it done in this instance. this content I just bought a ATA 320GBHD.